Introduction
PFN-6018VM is 16-port 10/100/1000Base-T + 2 Gigabit SFP Ports L2 + Management PoE Switch that is designed for small or medium network environment to strengthen its network connection. The 16 10/100/1000Base-T ports support IEEE 802.3at/af PoE technology, up to 30W per port and maximum 100m transmission distance. The switch equipped with AC to DC power module to support 200W power budget for PoE power. The added 2 SFP/RJ45 combo ports support 100M and Gigabit Fiber transceiver for long distance transmission. The switch also supports Layer 2+ full management software features. These features are powerful to provide PoE Control, Network Control, Management, Monitor and Security features’ requests. It is a superb choice to boost your network with better performance, efficiency and high PoE power consumption.
IEEE 802.3at/af Power over Ethernet (PoE) ports
The switch features 16 IEEE 802.3 at/af Power over Ethernet (PoE) ports that supply up to 30 watts per port. This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3at/af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at/af compliant, or only the data will be sent through LAN cable. By adding the switch to the existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.
2 Gigabit SFP Ports
PFN-6018VM supports 2 Gigabit SFP Ports to uplink to servers, storage, or other switching devices for long loop reach applications
Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.
Advanced Security
The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows to bind specific MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port based Access Control, every user should be authorized first when they want to access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to define the access privilege based on IP, MAC, Port number…etc.
Technical Specifications
|
Standard
|
Ethernet: IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3az EEE
PoE: IEEE 802.3af PoE, IEEE 802.3at PoE+
Protocol: IEEE 802.3x - Flow Control, IEEE 802.1Q – VLAN, IEEE 802.1p - Class of Service, IEEE 802.1D - Spanning Tree, IEEE 802.1w - Rapid Spanning Tree, IEEE 802.1s - Multiple Spanning Tree, IEEE 802.3ad - Link Aggregation Control Protocol (LACP), IEEE802.1v - Protocol VLAN, IEEE 802.1AB - LLDP (Link Layer Discovery Protocol), IEEE 802.1X - Access Control
|
Interface
|
Number of Port: 18
10/100/1000Base RJ-45 Port: 16, Auto-negotiation, Auto MDI/MDIX
1000M SFP Ports: 2
|
Performance
|
Switch Fabric: 32Gbps
MAC Address Table Size: 8K
Forwarding Rate:
1000Mbps port – 1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Packet Buffer: 4Mb
|
PoE Features
|
802.3af/at Compliant
Max. Power Output Per Port: 30W
PoE Power Budge: 220W
PoE Management:
Enable/Disable per-port
Priority Setting per-port
Maximum Power per-port/system
PoE Mode Setting per-port
PD Classification, PoE Status
|
L2 Features
|
Flow Control: 802.3x (Full-duplex)ort/ Back-Pressure (Half-duplex)
Spanning Tree:
IEEE 802.1D-2004(Includes IEEE 802.1w): Rapid Spanning Tree Protocol
802.1s Multiple Spanning Tree Protocol
Loop Detection
VLAN:
IEEE 802.1Q Tagged Based, Max. 4K
QinQ
Port-based VLAN
Voice VLAN
Private VLAN
MVR
MAC-Based VLAN
Protocol-Based VAN
Link Aggregation:
Static Trunk & IEEE 802.3ad with LACP
Max. Group: 5
Max. Ports/Group: 8
IGMP Snooping:
IGMP Snooping v1/v2/v3
IPv6 MLD Snooping v1/v2
Querier support/ IGMP Filtering, IGMP Leave Proxy, Immediate Leave
Storm Control: Broadcast/ Multi-cast/ Un-known Unicast
Jumbo Frame Support: 9K
|
QoS Features
|
Number of Priority queue: 8 queues/ port
Scheduling for priority queue : WRR/Strict Priority scheduling/Hybrid
CoS :
802.1p/ IP Precedence/ IP TOS Precedence
IP DSCP/ Port based Priority
Rate Limiting: Ingress/Egress: 1Kbps/ 1pps granularity
DiffServ (RFC2474) remarking
|
Security
|
User Name / Password Protection
User Privilege: up to 15 levels
IEEE 802.1x: Port-based Access Control
IP Source Guard
MAC Based Authentication
Web-based Authentication
HTTPS
SSHv2
RADIUS: Authentication/ Accounting
TACACS+: Authentication
ACL (Access control list)
|
Management
|
Command Line Interface (CLI)
Web Based Management
Telnet
Access Management Filtering: SNMP/WEB/SSH/TELNET
SNMP: v1/v2c/v3
RMON: RMON (1,2,3, & 9 groups)
DHCP: Client/ Relay/ Option82/ Snooping
Event/Error Log
Software Download/ Upgrade: HTTP
Configuration Download / Upload
sFlow
Port Mirroring: One to One/ Many to One
Remote Ping
NTP/LLDP
UPnP
EEE Configuration
Cable Diagnostics
IPv6 Configuration
|
Power Input
|
100~240VAC
|
Power Consumption
|
PoE Budget: max. 220W
System: 15W
|
Mechanical
|
Dimension (H*W*D) : 44*330*210mm
Weight: 2.5 kg
|
Environmental Specifications
|
Operating Temperature: 0 to 45℃
Storage Temperature: -20 to 85℃
Humidity: 10 to 90% RH (non-condensing)
|
Certification
|
CE, FCC Class A
|
|