OK
title-leftسوئيچ PFN-311 title-right
bg-corner

Introduction

PFN-311 is a 2 port PoE extender designed for extending connection distance for another 100m (328 ft) on both ends via Cat-5e or Cat-6 cable. You can cover longer distances by cascading multiple PFN-311s together on a network.  PFN-311 does not need any additional power supply and the PoE device (such as an IP camera) is powered by PoE switch or PoE injector.

IEEE 802.3af and Power over Ethernet (PoE) ports

PFN-311 features IEEE 802.3af Power over Ethernet (PoE). This product runs over existing LAN cable to power IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding PFN-311 to the existing networking, the installed networking products, such as: Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located or the networking can be extending distance for another 100M per extender and cascading for longer distances.

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5e or Cat-6 Ethernet cable without a new electrical outlet for both power and data. It helps you reduce installation time and cost.

 

Specifications

Data Rate

10/100 Mbps half/full duplex

Connectors

RJ45

Network Cables

Cat5e or better

PoE ON/OFF Switch

For turning PoE ON/OFF manually

LED

PoE/Data

Compatible

IEEE 802.3af, CE, FCC

Mounting

Wall

Environment

Indoor

Operation Conditions

-10 °C to 50 °C

Dimensions

106.7 x 59.5 x 22.5 mm


PoE Source

Number of PSD-311

Distance (m)

PD voltage (V)

PD Max power (W)

802.3af PoE switch

1

200

47

16.45

2

300

43.8

14.41

3

400

40.9

12.27

4

500

38

10.64


DATA SHEET

bg-corner