OK
title-leftسوئيچ PFN-7162I-at title-right
bg-corner

 

Introduction

PFN-7162I-at is a Gigabit Ethernet Switch with 16 10/100M Power over Ethernet (Poe) Ports plus 2 Combo Gigabit Copper/SFP Ports that is designed for medium or large network environment for strengthening network connections. Comes with rack-mount brackets, PFN-7162I-at’s 19-inch size will fit into your rack frame perfectly. PFN-7162I-at is a superb choice for boosting your network and providing better performances and efficiencies.

IEEE 802.3at Power over Ethernet (PoE) ports

Featuring IEEE 802.3at Power over Ether (PoE) standard, PS-7162I can supply power up to 250 Watts. It can also convert standard 100~240 Volts of AC power into low-voltage DC power that runs over existing LAN cable to power IEEE 802.3at compliant network devices. Also, PS-7162I features PoE-awareness for verifying if the receiving end of any network device is IEEE 802.4at compliant. If not, only data packets will be sent to that given network device through LAN cable. With PFN-7162I-at installed to your existing network environment, adding new network devices such as Access Points and IP Cameras will be easy and manageable, which means these devices can be easily deployed and the network administrators do not have to use heavy AC power adapters for power supply anymore.

2 Combo Gigabit Copper / 2 SFP Open Slots

PFN-7162I-at supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or other switching devices for long loop reach applications

Auto-MDI/MDI-X

All PFN-7162I-at’s ports can automatically detect the type of cables that connect to it, relieving the need of crossover cables whether connecting PS-7162I to another switch or to a computer.

Auto-Negotiation

Each of PFN-7162I-at’s ports can automatically detect if the connected network devices are running at 10Mbps, 100Mbps, or 1000Mbps in Half/Full-Duplex mode, and adjust accordingly.

Non-Blocking

PFN-7162I-at receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port simultaneously supports up to 200 or 2000Mbps of bandwidth in full-duplex mode. This feature provides full wire speed to the connected devices and allows your network to run smoothly.

Store and Forward

With this feature, PFN-7162I-at can maximize network performance while minimizing bad network packets from propagation.


Specifications

Standards

IEEE 802.3 10BaseT

IEEE 802.3u 100BaseTX

IEEE 802.ab 1000BaseT

IEEE 802.3z 1000BaseSX/LX

IEEE 802.3x Full-duplex and Flow Control

IEEE802.3at Power over Ethernet

Features

Number of Ports:

10/100BaseTX with RJ-45 Connectors: 16 port with 16 PoE(Half or Full power) port

10/100/1000BaseT with RJ-45 Connectors: 2

Combo SFP Open Slots: 2

MAC Address: 4K

Buffer Memory: 2.75Mb

Transmission Method: Store and Forward

Filtering/Forwarding Rates

1000Mbps port – 1,488,000pps

100Mbps port - 148,800pps

10Mbps port - 14,880pps

Transmission Media

10BaseT Cat. 3, 4, 5 UTP/STP

100BaseTX Cat. 5 UTP/STP

1000BaseT Cat. 5E UTP/STP

LED Indicators

Per Port: Link/Act,

PoE : Act / Status

Per Unit: Power

Power Input

100~240V/AC, 50~60Hz

Power Output

48~56V /DC Per Port Output

Power Consumption

250 Watts

Dimensions

440 x 220 x 44mm (W x D x H)

Operating Temperature

0 to 40 °C

Storage Temperature

-20 to 90 °C

Humidity

10 to 90% RH (non-condensing)

Certifications

FCC Class B, CE

Weight

4.2kg


 
bg-corner